*NOTE* This service manual is for a NON EN10 modified engine. Whilst most of the information is relevent, there are some critical differences.
For more information on EN10 modified engines, please contact
Mick Broom at Broom Development Engineering on +44 (0)1327 353023
Pick a topic from the following:
Timing Cover Removal
Oil Filter
Clutch Hydraulic Cylinder
Oil Pressure Relief Valve
Gear Selector Mechanism (Dismantling)
Gear Selector Mechanism (Adjustment)
Gear Selector Mechanism (Reassembly)
Oil Pump
Valve Timing Gear (Dismantling)
Valve Timing Gear (Reassembly)
Valve Clearance
Valve Adjustment
Valve Timing
Ignition Timing
Camchain Adjustment
Removal of the Cylinder Head and Barrel
Removal of the Valves Guides and Seals
Valve Guide Oil Seals
Valve Guide
Drive Side
. . . . Primary Drive (Dismantling)
. . . . Primary Drive (Reassembly)
Removal of the Engine from the Frame
Engine (Dismantling)
Separating the Crankcases
Engine (Reassembly)
Joining the Crankcases
or alternatively, pick a page from the following: